Industry

Standards All standards under development

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139

Standards under development (3474)

Reference	Title	Motive	Publication	For...
PREN ISO 4210-8	Cycles - Safety requirements for bicycles - Part 8: Pedals and crank test methods	New	Juin 2015	Participation
PREN ISO 4210-9	Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods	New	Juin 2015	Participation
PREN 13966-1 REV	Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels	New	Juin 2015	Participation
PREN ISO 8673 REV	Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B	New	Juin 2015	Participation
PREN ISO 8674 REV	Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B	New	Juin 2015	Participation
PREN ISO 8675 REV	Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B	New	Juin 2015	Participation
PREN 10284 REV	Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems	New	Juin 2015	Participation
EC101131	Metallic materials- Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems	New	Juin 2015	Participation
PREN ISO 10093 REV	Plastics - Fire tests - Standard ignition sources	New	Juin 2015	Participation
PREN ISO 13927 REV	Plastics - Simple heat release test using a conical radiant heater and a thermopile detector	New	Juin 2015	Participation
PREN ISO 844 REV	Rigid cellular plastics - Determination of compression properties	New	Juin 2015	Participation
PREN 14462 REV	Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3	New	Juin 2015	Participation
PREN ISO 2759 REV	Board - Determination of bursting strength	New	Mai 2015	Participation
ISO TS 19408	Footwear - Vocabulary and terminology - Footwear sizing designations and marking systems		Mai 2015	Participation
ISO 18216	Eye and face protection against electric fault arc		Mai 2015	Participation
ISO 683-4	Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels		Mai 2015	Participation
ISO TS 13399-308	Cutting tool data representation and exchange - Part 308: Concept for the design of 3D models based on properties according to ISO/TS 13399-3 - Modeling of milling cutters with fixing hole and indexable inserts		Mai 2015	Participation
ISO 21909-1	Passive neutron dosimetry systems - Part 1: Performance and test requirements for personal dosimetry		Mai 2015	Participation
ISO 15733	Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for tensile stress-strain behaviour of continuous, fibre- reinforced composites at room temperature		Mai 2015	Participation
ISO 16645	Radiation protection rules for the design of the treatment rooms with medical accelerators		Mai 2015	Participation
ISO 669	Resistance welding equipment - Mechanical and electrical requirements		Mai 2015	Participation
PREN ISO 15957	Challenge contaminants for testing air cleaning equipment		Mai 2015	Participation
ISO 20283-4/A1			Mai 2015	Participation
ISO TS 13399-201	Cutting tool data representation and exchange - Part 201: Concept for the design of 3D models based on properties according to ISO/TS 13399-2 - Modeling of regular inserts		Mai 2015	Participation
ISO 6721-10	Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer		Mai 2015	Participation